|
VISIT OUR SHOWROOMS!
Grand Rapids Location:
Braun Machinery Co., Inc.
Corporate Office
4130 44th St., SE
Grand Rapids, MI 49512
Phone: 616-698-6400
Fax: 616-698-8789
Southfield Location:
Braun Machinery Co., Inc.
21477 Bridge St., Ste. H
Southfield, MI 48034
Phone: 248-353-0750
Fax: 248-353-0430
CONTACT BRAUN MACHINERY
E-mail, use the Request Info
Form,
or call toll free at 800-968-1000 |
|
HURCO WINMAX
MILL INTRODUCTORY PROGRAM - TRAINING COURSE OUTLINE
I. Controls and Indicators
II. Setup Procedures
A. Top Level input mode
B. Part Setup
C. Tool Setup
1. Tool Calibration
2. Feed & Speed Calculations
D. Program Parameters
E. Part Programming
1. Position
2. Holes
a. Drill, Tap, Bore & Ream, Bolt Circle and Location
3. Milling
a. Circle, Frame, Face
b. Line, Arc, Blend Arc, Helix, 3D Arc
c. Closed/Open Contour
d. Lettering Block
4. Patterns
a. Loop Rectangular, Linear, Angular, Rotate
b. Location, Scale, Mirror Image
c. Pattern End
5. Miscellaneous
a. Graphics, On/Off
b. Change Parameters
c. Positioning
6. Insert/Delete Blocks
7. Copy & Change Blocks
a. Copy, Move, Delete Blocks
b. Modify Dimensions
c. Change All Tools, Feeds & Speeds
d. Change Feeds & Speeds by Tool
8. Erase Functions
III. Graphics
A. View
B. Full Scale
C. Zoom
D. Parameters (Graphics)
E. Data Block Search
IV. Review Mode
V. Project Manager
A. New
B. Open
C. Save
D. Save As
E. Close
F. Program Properties
G. File Manager
VI. Download & Upload
VII. Start NC
VIII. Operating Modes
A. Manual Operation
1. Tool in Spindle
2. Change T1/Diagnostics
3. Diagnostics
4. Park Machine
5. Warm-up Machine
6. Lock Spindle
7. Reset Servos
8. Calibrate Axes
B. Test Run
1. Dry Run
2. Feeds & Speeds
3. Check for Errors
C. Single Cycle Ops
D. Automatic
Operations
1. Start/End Block
2. Parameters
3. Check Errors
4. Recover/Restart
5. Run Program
IX. Concurrent ProgramsNOTE: It is recommended that students have one month of "hands on" before
attending class.
HURCO WINMAX
LATHE INTRODUCTORY PROGRAM - TRAINING COURSE OUTLINE
I. Controls and Indicators
II. Setup Procedures
A. Top Level input mode
B. Tool Setup
1. Tool Calibration
2. Feed & Speed
Calculation
3. Tool Orientation
C. Program Parameters
D. Part Programming
1. Position
2. Profiles
a. Rules of Lathe Profiles
3. Grooving
a. OD Grooves
b. ID Grooves
c. Face Groves
4. Threading
a. OD Threading
b. ID Threading
5. Holes
a. Drill
b. Tapping
6. Cutoff
7. Miscellaneous
a. Change Parameters
b. Change Part Setup
c. M Code
d. Bar Feed
e. Comment
f. Repeat Start
g. Repeat end
8. Insert/Delete
Blocks
9. Copy & Change
Blocks
a. Copy, Move, Delete Blocks
b. Modify Dimensions
c. Change All Tools, Feeds & Speeds
d. Change Feeds & Speeds by Tool
III. Graphics
A. View
B. Full Scale
C. Zoom
D. Parameters (Graphics)
E. Data Block Search
IV. Review Mode
V. Project Manager
A. New
B. Open
C. Save
D. Save As
E. Close
F. Program Properties
G. File Manager
1. Cut Folder
2. Copy
Folder
3. Paste
Files into Folder
4. Create
Folder
5. Rename
Folder
6. Delete
Folder
VI. Start NC
VII. Operating Modes
A. Manual Operation
1.
Diagnostics
2.
Reset Servos
3.
Calibrate Axes
B. Test Run
C. Single Cycle Ops
D. Automatic Operations
1.
Start/End Block
2.
Check for Errors
3.
Parameters
4.
Recover/Restart
5. Run
Program
NOTE: It is recommended that students have one month of "hands on" before
attending class.
|
|
|
|
