HURCO WINMAX
LATHE INTRODUCTORY PROGRAM - TRAINING COURSE OUTLINE
I. Controls and Indicators
II. Setup Procedures
A. Top Level input mode
B. Tool Setup
1. Tool Calibration
2. Feed & Speed
Calculation
3. Tool Orientation
C. Program Parameters
D. Part Programming
1. Position
2. Profiles
a. Rules of Lathe Profiles
3. Grooving
a. OD Grooves
b. ID Grooves
c. Face Groves
4. Threading
a. OD Threading
b. ID Threading
5. Holes
a. Drill
b. Tapping
6. Cutoff
7. Miscellaneous
a. Change Parameters
b. Change Part Setup
c. M Code
d. Bar Feed
e. Comment
f. Repeat Start
g. Repeat end
8. Insert/Delete
Blocks
9. Copy & Change
Blocks
a. Copy, Move, Delete Blocks
b. Modify Dimensions
c. Change All Tools, Feeds & Speeds
d. Change Feeds & Speeds by Tool
III. Graphics
A. View
B. Full Scale
C. Zoom
D. Parameters (Graphics)
E. Data Block Search
IV. Review Mode
V. Project Manager
A. New
B. Open
C. Save
D. Save As
E. Close
F. Program Properties
G. File Manager
1. Cut Folder
2. Copy
Folder
3. Paste
Files into Folder
4. Create
Folder
5. Rename
Folder
6. Delete
Folder
VI. Start NC
VII. Operating Modes
A. Manual Operation
1.
Diagnostics
2.
Reset Servos
3.
Calibrate Axes
B. Test Run
C. Single Cycle Ops
D. Automatic Operations
1.
Start/End Block
2.
Check for Errors
3.
Parameters
4.
Recover/Restart
5. Run
Program
NOTE: It is recommended that students have one month of "hands on" before
attending class.
